Skip to guide
UltraCom Anti-cheat
EN
Back to home
Support Anti-cheat Biostar

Biostar Valkyrie

Follow the guide for your motherboard.

TPM 2.0 Secure Boot UEFI Virtualization
i Before changing settings

Menu names depend on the model and BIOS version. Check your board manual and change only the listed settings.

Check the boot mode first: Win + R → msinfo32. If BIOS Mode is Legacy, prepare Windows for UEFI before disabling CSM, or the system may fail to boot.

If device encryption or BitLocker is enabled, save your recovery key first. Do not clear TPM or delete Secure Boot keys. Restoring factory keys is not suitable for every setup, especially with multiple operating systems.

This guide covers basic BIOS settings. If the anti-cheat separately requests IOMMU, VBS or a firmware update, follow the instructions for that error.

FACEIT requirements

Entering BIOS

How to open your motherboard settings.

  1. Restart your computer.
  2. Press Delete at the boot screen.

Virtualization

Enable processor virtualization support.

For Intel

  1. Go to the Advanced tab.
  2. Open CPU Configuration.
  3. Find Intel Virtualization Technology.
  4. Set it to Enabled.

For AMD

  1. Go to the Advanced tab.
  2. Open CPU Configuration.
  3. Find SVM Mode.
  4. Set it to Enabled.

TPM 2.0

Enable your computer's security module.

  1. Go to the Advanced tab.
  2. Open Trusted Computing.
  3. Find TPM Device Selection.
  4. Select Intel PTT for Intel processors.
  5. Select AMD fTPM (or Firmware TPM) for AMD processors.

If Security Device Support appears instead of a TPM type selector, set it to Enabled.

UEFI mode and CSM

Prepare the boot mode for Secure Boot.

If Windows boots in Legacy mode, prepare the switch to UEFI first. Do not disable CSM without checking this.

  1. Go to the Boot tab.
  2. Find CSM Support.
  3. Set it to Disabled.

Secure Boot

Enable Windows Secure Boot.

  1. Go to the Security tab.
  2. Open Secure Boot.
  3. Set it to Enabled.
If Secure Boot will not activate
  1. If activation fails: Key Management → restore factory keys (Restore Factory Keys / Load Default Keys).
  2. Save with F10 and restart.

Save settings

Apply changes and restart.

  1. F10 → OK → Restart.

Check the result in Windows

Only check off items you have verified on your computer.

0 / 3

The checklist is for your convenience. This website does not check your computer's settings automatically.